How to download aadhar card without acknowledgement slip

Hello friend today i'm going to tell you how the aadhar card can be download if your acknowledgement slip was lost. 

DON'T WORRY HERE IS THE SOLUTION FOR YOU.

If you have lost your AADHAR card Enrollment ID and don't know your AADHAR number, you can get the AADHAR card by following these steps below:

1. Go to https://resident.uidai.net.in/find-uid-eid
2. Select appropriate option, "Aadhaar No (UID)" OR "Enrolment No (EID)", under "You want to receive your lost:"
3. Enter your full name
4. Enter your email address
5. Enter your registered Mobile Number
6. Enter the security code as displayed and click on "Get OTP" button
7. One Time Password (OTP) will be delivered to your mobile and/or email address
8. In the box below, enter the OTP you just received on your mobile and/or email address
9. Click on "Verify OTP"
10. Now you will receive a message on your mobile with your AADHAR card number or Enrollment Id as you selected in Step 2 above
11. Now go to https://eaadhaar.uidai.gov.in/
12. Select appropriate option, "Enrollment Id" OR "Aadhaar", under "I have:"
13. Enter your AADHAR card number or Enrollment Id, full name, Pin Code, security text and mobile number
14. Click on "Get OTP"
15. One Time Password (OTP) will be delivered to your mobile and/or email address
16. Enter the OTP you just received on your mobile in the "Enter OTP" box and click on "Validate and Download"
17. Now you have downloaded your e-Aadhar card. Enter your Pin Code as the password when you open the PDF document
18. You now have your e-AADHAR card, which you can print out.

Thanks for your reading.

Downloading Torrent Using Internet Download Manager

Hello friend, today i  will show you how to download torrent file using IDM (Internet Download Manager)

Now lets start this tutorials without  any delay.

How To Transfer Torrent With IDM

1. First download the torrent file with .torrent extension which you wish to download from the internet directly without any torrent client like utorrent.

2. Now open zbigz.com and you will land on its homepage.

3. Then Click on upload Torrent and browse your torrent to transfer and click on Go.
4. Then it will ask you for Free or Premium service, choose Free to proceed further.
5. It will take some time to cache your file. Once the caching is done, click on transfer button to download your file as shown below.

6. You should have internet download manager installed on your computer so that download start inside IDM. If you don't have IDM don't worry it will download directly.

Note: If you decide on to use Free transfer then you wont be able to transfer file of more then 1 GB 

SEE ALSO

ENABLE GOD MODE IN WINDOW 7

Download Youtube Videos Without Any Software

HOW TO MAKE MULTIBOOTABLE WINDOWS USB FROM WinSetupFromUsb

In this guide, we will show you how to create multi-boot USB drive containing Windows 7 and Windows 8.1 installation files with the help of WinSetupFromUSB software.

ollow the given below instructions carefully to prepare your multi-boot USB drive containing Windows 7 and Windows 8.1 installation files,

Things you will need to prepare multiboot USB:

# Windows 7 ISO file

# Windows 8/8.1 ISO file

# 8 GB+ USB drive (we recommend 16 GB for 64-bit Windows)

# A computer running Windows 7, 8, or 8.1

NOTE: You must have Windows 7 and Windows 8/8.1 ISO files. If you have Windows 7 or Windows 8.8.1 DVDs, you need to prepare an ISO file image out of the DVD first. There are plenty of tools out there to help you crate bootable ISO image file from DVD. Almost all popular ISO image burning software, including popular ISO Workshop (free) allows you create ISO image from DVD.

Procedure:

Step 1: Visit this page and download the latest version of WinSetupFromUSB file. Extract the compressed zip file to get a folder named WinSetupFromUSB with separate executable for 32-bit and 64-bit Windows.

Step 2: Connect your USB drive to the PC and backup all data to a safe location, as the drive will be erased before making bootable.

Step 3: Run WinSetupFromUSB. Note that if you’re on x64 bit Windows, please run the executable named WinSetupFromUSB x64. Click Yes button when you see the UAC dialog.

Step 4: Under USB disk selection and format tools section, select your USB flash drive that you would like to make multi-boot.

Step 5: Turn the option titled Auto format it with FBinst on and then select NTFS as the file system. Note that if you’re preparing this multi-boot USB to install Windows 7/8.1 on a UEFI based PC, you need to selectFAT32 instead of NTFS.

Step 6: Under Add to USB disk section, check the box titled Windows Vista/7/8/Server 2008/2012 based ISO to see the browse button and then click the browse button to browse to your Windows 7 ISO image file. Select your Windows 7 ISO and then click Open button.

NOTE: If you have selected NTFS as the file system in Step 5, when you click the browse to select the ISO file, you will get a message saying that “If you need (U)EFI support for the 64-bit versions of Windows Vista SP1 or later, you must use FAT32 partition.”

Step 7: Finally, click Go button to begin transferring Windows 7 setup files to your USB. Click Yes button when you see the warning dialogs to continue. The process might take 15-30 

minutes depending on the version of Windows you’ve selected and your PC’s hardware.

Once done, you’ll see Job done message.

Now that we have added Windows 7 installation files to the USB, it’s time to transfer Windows 8/8.1 files to the USB. Don’t disconnect the USB from the PC and also don’t quit WinSetupFromUSB.

Step 8: In this step, we’re going to add Windows 8/8.1 installation files to the USB. Select your USB drive andbe sure to keep the option Auto format with FBinst turned off (selecting it will format the USB drive again, so be sure not to select it).

Step 9: Check Windows Vista/7/8/Server 2008/2012 based ISO file and this time, browse to your Windows 8.1 ISO file and click Open button to select it.

Step 10: Finally, click GO button, click Yes when you see two warning messages to begin transferring Windows 8/8.1 installation files to the selected USB. Once WinSetupFromUSB completes its business, you’ll see Job done message. You can safely remove the USB and then use it as multi-boot USB to install Windows 7 or Windows 8/8.1. That’s it! Good luck!

How to use Vlookup in Excel

Basically, VLOOKUP lets you search for specific information in your spreadsheet. For example,if you have a list of employee details, you could search for the details of specific employee.

1.To use vlookup first of all we have to create table (as shown in figure.)

2. Select tables and give table names such as Hulk.(as shown in figure)

3.Now we will write his name TO SEE the vlookup such as we want to see mobile number of Ram. Then we will type Ram and use vlookup formula for Ram.

=VLOOKUP(H19,HULK,6,0) 

EXPLANATION 

H19= IF YOU WANT TO SEE VLOOKUP OF RAM THEN CLICK ON RAM, H19 WILL BE SELECTED AUTOMATICALLY.BY THIS YOU CAN SEE  ANYONE VLOOKUP.NOW HERE I AM USING RAM. (YOU CAN TYPE ANY ONE NAME INSTEAD OF Ram)

HULK= HULK IS TABLE NAME (TABLE ARRAY)

6= WRITE THAT COLUMN  NUMBER  WHICH COLUMN NUMBER YOU WANT TO SEE.(FOR EX. COL 6)

0= FALSE VALUE(IT SHOW EXACT VALUE) 

4.And press enter.It show the mobile number of Ram.

.

Then it show the Mobile no. of Ram



Now you have learnt the use of vlookup .


THANKS FOR YOUR READING.